Search

Welcome to Tianjin Getes Testing Equipment Technology Development Co., Ltd.    

Top Products

Top Products

Address : NO. 14 ,Fengze Road, Zhangjiawo Industrial Park,Xiqing District,Tianjin,China.
Business Phone : 86-22-87980566(Working time)   
Fax : 86-22-87980568-612  Email :zhixiong.cai@getes-china.com 

China Good Quality Supplier。 Copyright © 2017 - 2019 getestest。com。 All Rights Reserved。

 

Scan the qr code
Browse the web site

Products

>
>
Thermal Cycle Test Stand (TC-1)
Page view:

Thermal Cycle Test Stand (TC-1)

classification
没有此类产品
Online inquiry
Inquiry
Details
Model No: GTS-TC-1
I。 Functional overview:
Thermal cycle test stand is one of the necessary test equipment for quality inspection of heat exchange devices. The test object of the device includes: copper radiator, aluminum radiator, intermediate cooler, oil cooler, evaporator and condenser.
It not only meets the high and low temperature alternating thermal impact test but also performs high temperature corrosion cycle test and low temperature corrosion cycle test。
 
II。 Main technical parameters
1. Temperature scope of high temperature fluid bath: 50~ 250℃;

2.Temperature scope of low temperature fluid bath: -50~ 50℃;

3.Temperature of environmental box: -40℃~ 150±2℃ (optional);

4 。Control scope of temperature impact: -50℃ ~250℃;

5.Impact frequency: 1~30 times/hour, set at will and determined according to the alternating

temperature;

6.Flowrate of impact medium: 5~800L/min;

7.Impact medium: anti-freezing solution, oil and glycol;

8。Simultaneously-tested quantity: 1~4 pieces;

9.Test pressure: 0~5Bar, change with flowrate and internal resistance of sample (adjustable);

10。Test times: 1~99999 cycles (set at will)。

 

III. Main function of the test stand

1.During the test process, the change waveform of thermal impact temperature difference, medium pressure, cycle times, elapsed cycle times, cycle times, high temperature time, low temperature, test state can be displayed dynamically (normal: green; pause: yellow; leakage: red).

2.On the surface of sample, temperature sensor measurement device is added to monitor the temperature of the surface of tested part. When it is in line with the switching condition of medium, switching between flowing in or out of impact medium may be switched automatically or manually.

3.During the test process, when the tested parts leaks, the system identifies automatically and stops to alarm.

4.With the function of printing report and failure alarm, the equipment may perform data connection with management platform of laboratory to achieve process control。

 
Corresponding parameter set not found, please add it in property template of background
暂未实现,敬请期待
暂未实现,敬请期待

Inquiry

Other products

No content information display available
Please add data record on website background.
AG体育 一定牛彩票网 足彩胜负14场 海南4+1玩法 山东群英会手机版